Huawei AP4030DN Hardware Installation And Maintenance Manual page 54

Huawei AP4030DN
Hardware Installation and Maintenance Guide

Before you install two OT terminals on a post, ensure that the two terminals can be installed
on the post and that the electrical connecting pieces have a large contact area. Two OT
terminals can be installed using any of these methods:
Figure 5-46 Bending the upper OT terminal at a 45- or 90-degree angle
Issue 02 (2015-05-18)
Figure 5-45 Installed OT terminal
Install two OT terminals on a post.
Bend the upper OT terminal at a 45- or 90-degree angle, as shown in
−
Cross the two terminals, as shown in
−
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-47.
5 Appendix
Figure 5-46.
50