Huawei AP4030DN Hardware Installation And Maintenance Manual page 60

Hide thumbs Also See for AP4030DN:

Table of Contents

Huawei AP4030DN

Hardware Installation and Maintenance Guide

Figure 5-57 Removing an unshielded Ethernet connector

----End

Installing Fiber Connectors

Context



Cleaning Fiber Connectors

Procedure

Step 1 Clean the pins of a fiber connector by using lint-free cotton and alcohol.

Step 2 Clean the pins again by using dust-free cotton. If necessary, clean the pins by using an air gun.

Ensure that the pins are free from any fiber or debris.

----End

Installing an FC Fiber Connector

Procedure

Step 1 Remove the dustproof cap of the FC connector and store it for future use.

Step 2 Align the core pin of the male connector with that of the female connector, as shown in

5-58.

Issue 02 (2015-05-18)

After you remove the dustproof cap, ensure that the fiber pins are clean and install them as

soon as possible.

When you disassemble fiber connectors, you must use a dedicated tool if the connectors

are densely installed.

Huawei Proprietary and Confidential

5 Appendix

Figure

Table of Contents