Table of Contents
Advertisement
Huawei AP4030DN
Hardware Installation and Maintenance Guide
Step 10 Push the jacket towards the metal shell until the metal shell is covered. This completes the
assembly of one end of the cable, as shown in
Figure 5-27 Pushing the metal shell
Step 11 To complete the assembly of the other end, repeat
----End
Assembling an Unshielded RJ45 Connector and Ethernet Cable
Context
Figure 5-28
Figure 5-28 Components of an unshielded RJ45 connector and cable
A. Plug of connector
Procedure
Step 1 Remove a 16-mm (0.63 in.) long section of the jacket, as shown in
Issue 02 (2015-05-18)
shows the components of an unshielded RJ45 connector and cable.
A
B
C
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
5-27.
Step 1
through
B. Jacket
C. Twisted-pair wires
5 Appendix
Step
10.
Figure
5-29.
39
Advertisement
Table of Contents
