Huawei AP4030DN Hardware Installation And Maintenance Manual page 7

Huawei AP4030DN
Hardware Installation and Maintenance Guide
Table 1-2 Description of the indicator on the AP4030DN
Type
Default status after
power-on
Software startup
status
Running status
Alarm
Issue 02 (2015-05-18)
Color
Green
Green
Green
Green
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status
Steady on
Steady on after
blinking once
Blinking once every
2s (0.5 Hz)
Blinking once every
5s (0.2 Hz)
Blinking once
Alarm Green every
0.25s (4 Hz)
1 AP Overview
Description
The AP is just
powered on and the
software is not
started yet.
After the system is
reset and starts
uploading the
software, the
indicator blinks
green once. Until the
software is uploaded
and started, the
indicator remains
steady green.
The system is

running properly,
the Ethernet
connection is
normal, and
STAs are
associated with
the AP.
The system

enters the Uboot
CLI.
The system is
running properly,
the Ethernet
connection is
normal, and no STA
is associated with
the AP. The system
is in low power
consumption state.
The software is

being upgraded.
After the

software is
uploaded and
started, the AP
requests to go
online on the AC
and maintains
this state until it
goes online
successfully on
the AC (before
the CAPWAP
3