Connecting Cables - Huawei AP4030DN Quick Start Manual

AP4030DN Quick Start Guide

2.6 Connecting Cables

Figure 2-3 and Table 2-2 shows interface and cable connection of AP4030DN。
Table 2-2 Cable Connection
No.
1
2
Issue 01 (2015-02-06)
You need to purchase the security lock separately.
Figure 2-3 Interfaces of the AP4030DN
Cable
Ethernet cable
DC power adapter
华为专有和保密信息
版权所有 © 华为技术有限公司
Description

The network cables used are category-5 enhanced or higher
twisted pairs.

Ensure that the AP is connected to the Ethernet using the
Ethernet cable that works properly. If the Ethernet cable is
not working properly, for example, RJ45 connectors are
short- circuited, the AP may fail to be powered on or fail to
work. Before connecting an Ethernet cable to the AP, use
the cable test tool to check whether the cable is qualified. If
the cable is unqualified, replace it.

The AP supports the PoE power supply and DC power
supply.

To connect the AP to a DC power source, use the power
adapter delivered with the AP; otherwise, the AP maybe
damaged.
Contents
18