Huawei AP4030DN Hardware Installation And Maintenance Manual page 34

Huawei AP4030DN
Hardware Installation and Maintenance Guide
Figure 5-10 Heating the heat shrink tubing (JG terminal)
----End
Assembling the Cord End Terminal and the Power Cable
Context
Figure 5-11
Figure 5-11 Components of a cord end terminal and a power cable
A. Cord end
terminal
Procedure
Step 1 Based on the cross-sectional area of the cable conductor, strip a part of the insulation. The
L1-long conductor is exposed, as shown in
listed in
Issue 02 (2015-05-18)
shows the components of a cord end terminal and a power cable.
B. Insulation layer of a power
cable
Table 5-3.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
C. Conductor of a power
cable
Figure 5-12. The recommended values of L1 are
5 Appendix
30