Toshiba GR200 Series Instruction Manual page 876

Object_reference
Ctrl/GGIO2701$ISCSO$origin
Ctrl/GGIO2701$ISCSO$origin
Ctrl/GGIO2701$ISCSO
Ctrl/GGIO2701$ISCSO
Ctrl/GGIO2701$ISCSO
Ctrl/GGIO2701$ISCSO
Note: "Status (ST)" is defined in the function constraint (FC) of the IEC 61850 standard.
Figure 4.9-67 ocCat attribute mapped for ISCSO object of GGIO2701
Mapping input data
(iii)
The TPOS01 function can receive three commands "select, operate, and cancel". Thus, the user
should map the input-point " DEV01_CONTROL_REQ" to the IEC61850 communication. Table
4.9-39
shows
"Ctrl/GGIO2701$ISCSO" ; the user should map the input-point to the Object references having
attributes CO and CF†. Figure 4.9-68 shows how to map a signal.
†Note: The attribute is defined in the IEC 61850 standard; "CO" stands for "Control"
and "CF" stands for "Configuration" in the functional constraint (FC).
Table 4.9-38 Mapping signals for ISCSO object
Attribute
orCat orCategory
orIdent Octet64
stVal INT32
q Quality
t Timestamp
stSeld BOOLEAN
the input-point "DEV01_CONTROL_REQ"
- 855 -
Type FC Signal Number
ST 513001 3104011008
ST 513001 6A04011009
ST 513001 3104011001
ST 513001 3104011005
ST 513001 9004011006
ST 513001 0004011D90
Drag and drop
6F2S1915 (0.46)
Signal Name
TPOS01_ORCAT
TPOS01_ORIDENT
TPOS01_STATE
TPOS01_QUALITY
TPOS01_TIMESTAMP
TPOS01_SLD_RPT
and the Object reference
GRZ200 (Soft 031 & 032)