Toshiba GR200 Series Instruction Manual page 502

Defining SBO mode
Figure 3.7-16 exemplifies the GCNT01 logic node saved as "GIGO3302"; in the SBO mode, the
user should select the following items for the "GIGO3302$ISCSO" using GR-TIEMS:
Figure 3.7-16 LN editing screen for SBO mode (for example)
Defining DIR mode
Figure 3.7-17 exemplifies the GCNT01 logic node saved as save as "GIGO3302"; in the DIR
mode, the following three items should be selected using GR-TIEMS.
Figure 3.7-17 LN editing screen for DIR mode (for example)
SBOw

Oper

Cancel

Origin

stSeld

sboClass† (choice "operate-once")

ctlmodel (choice "SBOes or SBOns")

†"sboClass" can be found by scrolling down.
Oper

Origin

ctlmodel (choice "SBOes or SBOns" )

- 481 -
6F2S1915 (0.46)
GRZ200 (Soft 031 & 032)