Toshiba GR200 Series Instruction Manual page 1028

Note: The 'I e ' and 'I em ' are taken usually with corresponding 'I e ' and 'I em ' circuits of the
2
VCT.
Note: Those recoding items are provided by the special software, which is selected using
3
the 'Software selection' in the ordering..
Screen information
8.1.2
Figure 8.1-1 illustrates the information displayed on the IED screen†, which can display up to
eight fault records (#1 to #8). Figure 8.1-2 illustrates the structure of the first fault record#1.
The line○ indicates the tripped phase. The lines○
c
have the information about evolving faults, which is able to memory up to 32 developing faults.
Quantitates when the fault occurred are shown below messages○
Fault Record
10:48
#1
10:48:21.223
#2
01:15:55.018
#3
13:11:29.621
List of fault records (#1 to #8)
Figure 8.1-1 Information of the fault recorder displayed on the IED screen
†Note: For more screen information, see Chapter
more information about the FL calculation, see Chapter
end fault locator
1/6
2012-07-25 >
2012-07-21 >
2012/07/21 >
.
- 1007 -
show how tripping occurred. The lines○
d
○
g h
Fault Record#1
10:48 1/222
2012-07-25
10:48:21.223
Phase AB
OC1, OC2, OC3, OC4
SOTF–OC
FL 0.0km
Details of #1 information
User interface: Record sub-menu
Relay application: Single-
6F2S1915 (0.46)
.
. For
GRZ200 (Soft 031 & 032)
f