Toshiba GR200 Series Instruction Manual page 1162

11 Communication protocol
Contents
IEC 60870-5-103 operation
-Interface
-Interoperability
-Operation
IEC 61850 operation
-About protocol
-Communication service
-Engineering work
-Goose monitoring status
-Protocol selection
-Quality signal
-Setting
-Supervise
-61850 Editon1 option
-61850 Editon2
─────────────────────────────────────────────────────────────────
Note: The implementation of such protocols depends on the selection of protocols. Several
IED models do not have the protocols. To determine whether the protocols are implemented in
an IED, locate its IED ordering code, and check it at the "U" position referring to the
comparison table below. For more information, see
Sec.
Position "U"
11.3 IEC 61850
11.4 IEC 60870-5-103
✓: Applicable
LAN modules, designed for PRP/HSR/RSTP marked with "L or N" code at position "E", shall
1
be selected and mounted in the IED, if the network requires PRP/HSR/RSTP operation.
One of protocols (i.e., either 61850 or 103) shall be selected before the in-service operation.
2
Table Comparative table in respective ordering codes
NA: Not applicable
Pages
– LAN operation
1219 -IP address
1222 -Hot standby operation
1243 -PRP/HSR operation
1164 -RSTP operation
1164 -Monitoring (Hot standby)
1167 -Monitoring (PRP/HSR)
1170 Selection of slave protocol
1199 RS485operation
1191 USB operation
1192
1189
1191
1166
1166
Appendix: Ordering
Ordering codes
1
1
✓
2
✓
- 1141 -
6F2S1915 (0.46)
Pages
–
1143
1144
1152
1156
1146
1154
1142
1248
1247
.
2
NA
GRZ200 (Soft 031 & 032)