Toshiba GR200 Series Instruction Manual page 1132




Table 10.2-75 Detailed error information of 61850error
Error#
Function error found
0002
Failure occurred on going through the
0003
selection process with regard to the protocol
Failure occurred during initialization of
0004
protocol process
Failure for opening file
0005
Failure of access
0006
No buffer space
0007
No space left in the buffer provided for the
0008
SSP mapping
Failure of memory allocation in the memory
0009
dynamically
Check sum errors
000A
000B Failure of object search
Failure of the defining of data type
000C
the IEC61850 protocol.
The second of that (i.e., "0004") is a reason (see Table 10.2-75), and it turns
out the 61850 initialization.
The top right and the middle left parts are the Data ID of the reason (i.e.,
"51200131" and "03011001"; the user can combine them into "512001
3103011001").
The others are used to show the name of the 61850 logical data. Figure
10.2-1 has "4747494F, 32245354, 7456616C" codes, so the user can convert
the codes to the "GGIO2$STtVal" message using Hexadecimal to ASCII
conversion method.
Reasons of errors
messages
- 1111 -
Error#
Erroneous index being used in the data
000D
for the protocol stack designated
000E Time out
000F Going through the process
0010 Found invalid arguments
0011 Found the data type not being supported
Failure of the acquisition of the authority
0012
right
0013 Failure occurred on the setting process
0014 Failure of the event registration
0015 No event occurred
0016 Restarting
0017 Communication error
6F2S1915 (0.46)
Messages
GRZ200 (Soft 031 & 032)