Lowering The Seat; Locating The Jacking Points - Toro Reelmaster 7000-D Operator's Manual

Figure 108
1. Slot (seat support)

Lowering the Seat

1. Rotate the seat slightly, and lift the prop rod out
of the dent of the seat support slot
Figure 109
1. Slot (seat support)
2. Carefully lower the seat until it latches securely.

Locating the Jacking Points

Note:
Support the machine with jackstands whenever
you work under the machine; refer to
(page 30).
Use the following as machine-lift points:
•
Front of the machine—at the frame of the machine,
forward of the wheel-drive motors
Important:
Do not support the machine at the
wheel-drive motors. Keep the lifting equipment
clear of hydraulic tubing and hoses.
g369008
2. Prop rod
(Figure 109).
g369220
2. Prop rod
Specifications
(Figure 110).
•
Rear of the machine—at the center of the axle
(Figure 111)
Note:
Locate the jackstands of the specified
capacity at both sides of the gear case and under
the axle.
Important:
Do not support the machine at the
tie rod.
61
Figure 110
Figure 111
g369205
g371178