Toro Reelmaster 7000-D Operator's Manual page 47

Figure 76
2. Press the right button to change the inhibit
regeneration setting from On to Off
or from Off to On
Figure 77
Allowing a Reset Regeneration
The InfoCenter displays the high exhaust-temperature
icon when the reset regeneration is in process.
Note:
If I R
NHIBIT EGEN
displays A #185
DVISORY
to set inhibit regeneration setting to O
with the reset regeneration.
(Figure
(Figure 77).
is set to O , the InfoCenter
N
(Figure 78). Press button 3
and continue
FF
g227304
Note:
If the engine exhaust temperature is too low,
76)
the InfoCenter displays A
inform you to set the engine to full throttle (high idle).
g224691
Note:
When the reset regeneration completes, the
high exhaust-temperature
InfoCenter screen.
47
Figure 78
#186 (Figure
DVISORY
Figure 79
disappears from the
g224394
79) to
g224395