Figure 17
1. Carriage bolt (3/8 x 1-1/4
inches)
2. Turf-compensator bracket
3.
Remove the flange locknut (3/8 inch) that
secures the capscrew of the turf compensation
spring to the right tab of the carrier frame,
and remove the compensation spring from the
cutting unit
(Figure
Note:
Do not remove the flange serrated nut
from the capscrew.
Figure 18
1. Capscrew
2. Right tab (Carrier frame)
4.
Assemble the capscrew of the turf compensation
spring to the right tab of the carrier frame
19) with the flange locknut (3/8 inch).
3. Flange locknut (3/8 inch)
18).
3. Flange locknut (3/8 inch)
(Figure
g375690
1. Flange locknut (3/8 inch)
2. Right tab (Carrier frame)
5.
Align the holes in the turf-compensator bracket
with the holes in the cutting-unit frame
20).
Note:
The support loop of the hose guide aligns
toward the centerline of the machine.
g375691
1. Turf-compensator bracket
2. Carriage bolt (3/8 x 1-1/4
inches)
6.
Assemble the turf-compensator bracket to the
cutting-unit frame with the 2 carriage bolts (3/8 x
1-1/4 inches) and 2 flange locknuts (3/8 inch).
7.
Torque the locknuts and bolts to 37 to 45 N∙m
(27 to 33 ft-lb).
16
Figure 19
3. Capscrew
Figure 20
3. Flange locknut (3/8 inch)
4. Inboard
g375694
(Figure
g378789