Applying The Ce Decals - Toro Reelmaster 5010-H Operator's Manual

Figure 36
1. Hood latch
2. Nut
4. Remove the nut from the lock.
5. Outside the hood, insert the hook end of the
latch through the hole in the hood.
Note:
The seal is aligned to the outside of the
hood.
6. Inside the hood, Secure the lock to the hood
with the washer and nut.
7. Close the hood, and use the enclosed hood-latch
key to check that the hook of the lock engages
the frame catch when locked.
8

Applying the CE Decals

Parts needed for this procedure:
1 CE decal
1 Production year decal
1 Warning decal
Applying the CE Decal
1. Use rubbing alcohol and a clean rag to clean
the area of the hood next to the hood lock, and
allow the hood to dry.
g375326
3. Seal
4. Washer
(Figure 37).
1. CE decal
2. Remove the backing from the CE decal.
3. Apply the decal to the hood.
Applying the Year of Production
Decal
1. Use rubbing alcohol and a clean rag to clean the
floor bracket area next to the serial plate, and
allow the bracket to dry
1. Year of production decal
2. Remove the backing from the year of production
decal.
3. Apply the decal to the floor bracket.
Applying the CE Warning Decal
1. Use rubbing alcohol and a clean rag to clean the
surface of warning decal 133-2930, and allow
the decal to dry
22
Figure 37
2. Hood lock
(Figure 38).
Figure 38
2. Serial plate
(Figure 39).
g375337
g375339