Toro Reelmaster 5010-H Operator's Manual page 40

Maintenance Service
Interval
Every 250 hours
Every 400 hours
Every 800 hours
Every 1,000 hours
Every 2,000 hours
Before storage
Every 2 years
Maintenance Procedure
• Torque the wheel lug nuts to 94 to 122 N∙m (70 to 90 ft-lb).
• Service the air cleaner. (more frequently in extremely dirty or dusty conditions).
Service the air cleaner earlier if the air-cleaner indicator shows red.
• Replace the fuel filter.
• Check the fuel lines and connections for deterioration, damage, or loose
connections. (Or yearly, whichever comes first).
• Check the engine speed (idle and full throttle).
• Drain and clean the fuel tank. Drain and clean the fuel tank if the fuel system
becomes contaminated.
• Check the rear wheel toe-in.
• If you are not using the recommended hydraulic fluid or have ever filled the reservoir
with an alternative fluid, replace the charge filter.
• If you are not using the recommended hydraulic fluid or have ever filled the reservoir
with an alternative fluid, change the hydraulic fluid.
• Pack the rear wheel bearings.
• Adjust the engine valves (refer to the engine service manual).
• If you are using the recommended hydraulic fluid, replace the charge filter.
• If you are using the recommended hydraulic fluid, change the hydraulic fluid.
• Drain and clean the fuel tank. Drain and clean the fuel tank if you store the machine
for an extended period.
• Flush and replace the cooling system fluid.
• Replace the hydraulic hoses.
• Replace the coolant hoses.
• Flush and replace the coolant.
• Replace all moving hoses.
40