Installation Preparations; Engineering Personnel; Basic Requirements For Personnel; Requirements For Antenna And Feeders Installation Personnel - Huawei Airbridge cBTS3612 Installation Manual

Cdma base station
Hide thumbs Also See for Airbridge cBTS3612:
Table of Contents

Advertisement

Installation Manual
Airbridge cBTS3612 CDMA Base Station
This chapter aims to introduce the initial stage of project preparations, goods
unpacking and verification.

2.1 Engineering Personnel

2.1.1 Basic Requirements for Personnel

1)
If the project is cooperated with other parties, engineers from cooperation parties
should play the key role in installation, engineers from the user shall provide
necessary assistance, and the engineers from the vendor supervise the whole
installation process.
2)
If the project is not cooperated with other parties, engineers from the vendor
shall play the key role in installation, and the engineers from the user shall
provide assistance.
3)
Engineers from the cooperation party shall be strictly trained and examined by
the vendor. Only after they have mastered the installation and testing methods,
and obtained the qualification certificates, can they implement the installation
and commissioning under the supervision of vendor engineers.
4)
Engineers from the user shall receive some training given by the vendor to
master the installation and construction methods prior to the installation.

2.1.2 Requirements for Antenna and Feeders Installation Personnel

The antenna and feeders should be installed by installation personnel under the
supervision of the project supervisor. Thus, the project supervisor and personnel
should be strictly trained, examined and obtain the qualification certificates.
1)
The "Safety First" principle should be followed for the supervisor to arrange
appropriate personnel for the appropriate work, especially for the tower-top
installation. In addition, the supervisor must record the actual project data.
2)
Installation personnel: They are required to be proficient in operations under the
supervision of the supervisor. Particularly those working at heights must be
acrophobia-free, in well health conditioned, and observe the instrument safety
procedures. Additionally, they should have the certificates for working at heights,
and be provided with the guaranty of security insurance and prohibited from
drinking.
3)
The number of installation personnel should be determined according to
installation environment. Respectively, at least 5 persons are required for

2 Installation Preparations

2-1 
Hardware Installation
2 Installation Preparations

Advertisement

Table of Contents
loading

Table of Contents