Unpacking Wooden Case - Huawei Airbridge cBTS3612 Installation Manual

Installation Manual
Airbridge cBTS3612 CDMA Base Station
Shipping packages consist of wooden cases and cartons. Different unpacking tools
on site shall be used according to different packages .
II. Checking antenna goods
Because the antenna and feeder system consists of various parts provided by
different suppliers, and the goods are different on such aspects of vendors, dates,
and locations, the project supervisor is responsible for checking those parts. The
installation personnel is required to read the installation manual to gain a clear
understanding first and then commence the installation. Put the index description
document in a noticeable place so that the engineers can turn to the document for
reference.
Fill Equipment Problem Feedback Table according to goods errors and submit it to
the related departments of Huawei by the project supervisor.

2.7.2 Unpacking Wooden Case

Heavy installation equipment such as racks, feeder clip and power supply module are
usually shipped in wooden cases. The wooden case packing is shown in Figure 2-1.
(1) Moisture-proof bag
(4) Top of the machine
(7) Top of the machine
Figure 2-1 Wooden case packing
I. Unpacking the cabinet
The BTS packing box consists of the package, foamed packing angles and the plastic
bag etc. It is recommended to unpack the box in or near the equipment room (if the
space allows) to prevent the damage during portage.
(2) Rear of cabinet
(5) Pressure-sensitive adhesive tape (6) Foamed L-square
(8) Front of cabinet
2-9
Hardware Installation
2 Installation Preparations
(3) Foamed wrap angle
(9) Package label