Table of Contents
Advertisement
Installation Manual
Airbridge cBTS3612 CDMA Base Station
The heights of A600 series support assemblies I, II and, III can be adjusted steplessly
within their adjustable ranges. The heights are adjusted by moving the upper and
lower supports.
Type IV assembly is a height-fixed support. It is mainly suitable for ultra-high and
ultra-low floors. The minimum applicable floor height of this assembly is 140mm.
III. Support installation
The support is installed in the floor-bracketing mode. Namely, bracket the floor
between the cabinet and the support, then run the bolts through the anti-static floor to
fix the cabinet and the support. In this way, the cabinet can be firmly fixed and
supported.
IV. Number of supports
2N installation supports are used to install the cabinets, i. e., N cabinets should be
supported with 2N supports. Figure 3-9 is the schematic diagram of cabinet
installation on anti-static floor.
Figure 3-9 Cabinet installation on anti-static floor
3-10
Hardware Installation
3 Cabinet Installation
Advertisement
Chapters
Table of Contents
