Assembling Sc-J2S(B) J4Kt5K - Mitsubishi Electric MELSERVO-J2S Series Manual

３.３.５ Assembling SC-J2S(B) J4KT5K
(１) Mounting the Replacing Servo Amplifier on Renewal Kit
* You have no extra space between the servo amplifier
and Renewal Kit. To mount the servo amplifier, use
such a Phillips head screwdriver as shown below.
Approx. 200mm
１．Remove the 2 grounding terminal screws on the replacing servo amplifier in advance.
* Make sure to remove the grounding terminal screws in advance.
２．As shown in the drawing below, mount the replacing servo amplifier on the amplifier base ①.
To mount the replacing servo amplifier, use the screws among the accessories in the package
(M5×12; 4 screws).
３．Mount the TE bracket ② on the replacing servo amplifier. Fasten it with the grounding terminal
screws you removed in advance.
Grounding terminal screw
(on the replacing servo amplifier)
②Bracket TE
Note 1
When mounting the amplifier base ①, pay
attention to the direction of the amplifier
base. If you try to mount the servo
amplifier in an incorrect direction, you
cannot mount it correctly. For the details,
see section 3.3.3, paragraph (8).
Phillips head screwdriver
Replacing servo amplifier
３-２４
3 － 24
①Amplifier base