Installation And Licensing Of Ise Design Suite; Downloading And Installing Tool Licenses - Xilinx Virtex-6 FPGA Getting Started Manual

Installation and Licensing of ISE Design Suite

4.
X-Ref Target - Figure 27
Congratulations! The system performance of the Virtex-6 FPGA Connectivity Kit has been
evaluated using the pre-built demonstration design. This design includes the built-in
integrated block for PCI Express (4-lane, 5 GT/s configuration for PCI Express v2.0), XAUI
LogiCORE IP, a Virtual FIFO memory controller designed to interface to the onboard
DDR3 SODIMM device, and a third-party DMA controller for PCI Express.
Installation and Licensing of ISE Design Suite
This Virtex-6 FPGA Connectivity Kit comes with an entitlement to a full seat of the ISE
Design Suite: Embedded Edition that is device locked to a Virtex-6 LX240T FPGA. This
software can be installed from the DVD or the Web installer can be downloaded from
http://www.xilinx.com/support/download/index.htm.
For detailed information on licensing and installation, refer to UG631, ISE Design Suite:
Installation, Licensing, and Release Notes, located on the Xilinx documentation site at
http://www.xilinx.com/support/documentation.

Downloading and Installing Tool Licenses

1.
36
View the PCIe statistics in Performance Monitor (see
to view data transfer numbers on the PCIe interface.
Figure 27: PCIe Statistics in the Performance Monitor
Visit the Xilinx software registration and entitlement site at
http://www.xilinx.com/getproduct
licensing site (Figure 28).
www.xilinx.com
Figure 27). Click PCIe Statistics
to access the Xilinx product download and
Virtex-6 FPGA Connectivity Kit Getting Started
UG664 (v1.4) July 6, 2011
UG664_15_091010