Xilinx Virtex-6 FPGA Getting Started Manual page 22

Getting Started with the Connectivity Targeted Reference Design Demo
X-Ref Target - Figure 13
22
c. Select Install the software automatically and click on Next. The system
associates the Xilinx DMA driver to the PCI Simple Communications Controller.
Click on Finish to proceed and install the child drivers Raw Data and XAUI
(Figure 13).
Figure 13: Load Driver - XDMA
www.xilinx.com
UG664_63_052011
Virtex-6 FPGA Connectivity Kit Getting Started
UG664 (v1.4) July 6, 2011