Install Windows Driver - Xilinx Virtex-6 FPGA Getting Started Manual

X-Ref Target - Figure 5

Install Windows Driver

7.
X-Ref Target - Figure 6
Virtex-6 FPGA Connectivity Kit Getting Started
UG664 (v1.4) July 6, 2011
Getting Started with the Connectivity Targeted Reference Design Demo
Figure 5: Insert the ML605 Board into the PCIe Slot
Ignore the Found New Hardware Wizard:
a. Power the PC system on and wait for the operating system (OS) to load.
b. The system recognizes a new PCIe endpoint card connected to it and starts the
Found New Hardware Wizard.
c. Click on Cancel to close the wizard
Figure 6: Ignore Found New Hardware Wizard
www.xilinx.com
(Figure 6).
UG664_57_052011
UG664_05_011610
15