Cc-Link Communication Functions 3- 1 To; Communication Specifications - Mitsubishi Electric MELSERVO-J2-Super Series Instruction Manual

3. CC-Link COMMUNICATION FUNCTIONS
3. CC-Link COMMUNICATION FUNCTIONS

3.1 Communication specifications

For details of the PLC side specifications, refer to the CC-Link system master unit manual.
Item
Power supply
Applicable CC-Link version
Applicable servo amplifier
Communication speed
Communication system
Synchronization system
Encoding system
Transmission path format
Error control system
Connection cable
Transmission format
Remote station number
Communication speed
(Note)
Maximum overall cable length
Cable
length
Interstation cable length
Number of servo amplifiers connected
Note. Depends on the cable used. For more information, refer to the CC-Link system master/local unit user's manual.
POINT
This servo is equivalent to a remote device station.
156Kbps
1200m
Max. 42 (when 1 station is occupied by 1 servo amplifier), (max. 32 when
2 stations are occupied by 1 servo amplifier), when there are only remote
device stations. Can be used with other equipment.
MR-J2S-T01 specifications
5VDC supplied from servo amplifier
Ver.1.10
MR-J2S- CP -S084
10M/5M/2.5M/625k/156kbps
Broadcast polling system
Frame synchronization system
Bus format (conforming to EIA RS485)
CRC (X
Shielded 3-core twisted pair cable
Conforming to HDLC
625Kbps 2.5Mbps
900m
0.2m or more
3 - 1
MRZI
+X +X +1)
16 12 5
1 to 64
5Mbps
400m 160m
10Mbps
100m