Huawei B2368 User Manual page 79

LTE CPE B2368
User Guide
Figure 8-2 Network Setting >NAT >Port Forwarding
The following table describes the fields in this screen.
Table 8-1 Network Setting > NAT > Port Forwarding
Label
Add new rule
#
Status
Service Name
WAN Interface
WAN Start Port
WAN End Port
LAN Start Port
LAN End Port
LAN IP Address
Protocol
Modify
Issue 03 (2019-01-31)
Description
Click this to add a new port forwarding rule.
This is the index number of the entry.
This field indicates whether the rule is active or not.
A yellow bulb signifies that this rule is active. A gray bulb signifies
that this rule is not active.
This is the service's name. This shows User Defined if you manually
added a service. You can change this by clicking the edit icon.
This shows the WAN interface through which the service is
forwarded.
This is the first external port number that identifies a service.
This is the last external port number that identifies a service.
This is the first internal port number that identifies a service.
This is the last internal port number that identifies a service.
This is the server's IP address.
This shows the IP protocol supported by this virtual server, whether it
is TCP, UDP, or TCP/UDP.
Click the Edit icon to edit the port forwarding rule.
Click the Delete icon to delete an existing port forwarding rule. Note
that subsequent address mapping rules move up by one when you take
this action.
Copyright © Huawei Technologies Co., Ltd.
8 Network Address Translation (NAT)
71