The System Log Screen - Huawei B2368 User Manual

LTE CPE B2368
User Guide
CODE
2
3
4
5
6
7

17.2 The System Log Screen

Click System Monitor > Log to open the System Log screen. Use the System Log screen to
see the system logs for the categories that you select in the upper left drop-down list box.
Figure 17-1 System Monitor > Log > System Log
The following table describes the fields in this screen.
Table 17-2 System Monitor > Log > System Log
Label
Select the type of the logs that you want to search in the first drop-down list box.
(Types: All Logs, WAN-DHCP, System Maintenance, Remote Management, TR-069, NTP,
ETHER, DDNS, NAT, Attack, ACL, LTE)
Level
Refresh
Clear Logs
Issue 03 (2019-01-31)
SEVERITY
Critical (CRIT): The system condition is critical.
Error (ERROR): There is an error condition on the system.
Warning (WARNING): There is a warning condition on the system.
Notice (NOTICE): There is a normal but significant condition on the system.
Informational (INFO): The syslog contains an informational message.
Debug (DEBUG): The message is intended for debug-level purposes.
NOTE
The LTE device supports sending ERROR, INFO, and DEBUG severity level logs.
Description
Select a severity level from this drop-down list box. This filters search
results according to the severity level you have selected. When you
select a severity, the LTE Device searches through all logs of that
severity or higher. See
levels.
Click this to renew the log screen.
Click this to delete all the logs.
Copyright © Huawei Technologies Co., Ltd.
Table 17-1 for more information about severity
17 Logs
136