LTE CPE B2368
User Guide
Table 4-1 Network Setting > Broadband > Broadband
Label
Action
Apply
Cancel
Data Roaming
Apply
Cancel
Internet Setup
#
Enabled
Name
APN
NAT
Modify
4.2.1 Edit Broadband Connection
Use this screen to configure a WAN connection.
Click an LTE connection's Edit icon to display a screen like the one shown next.
Issue 03 (2019-01-31)
Description
Select Connect to have the LTE Device use the LTE connection.
Select Disconnect to have the LTE Device not use the LTE connection.
Click this to save the change in this section.
Click this to restore your previously saved settings in this section.
Select Enable to allow the LTE Device to use other carriers' LTE
connections.
Select Disable to stop the LTE Device from using other carriers' LTE
connections.
Click this to save the change in this section.
Click this to restore your previously saved settings in this section.
The index number of the broadband connection in the list.
This shows whether the broadband connection is turned on or off.
This shows the name of the broadband connection.
This is the name of the LTE network to which the broadband
connection connects.
This shows whether NAT is activated or not for this connection.
Click the Edit icon to configure the connection.
Copyright © Huawei Technologies Co., Ltd.
4 Broadband
29