Huawei B2368 User Manual page 112

LTE CPE B2368
User Guide
Figure 14-2 Add/Edit GRE Tunnel
The following table describes the fields in this screen.
Table 14-2 Add/Edit GRE Tunnel
Label
GRE Setup
Enabled
Tunnel Name
GRE Layer
Server IP
Address
GRE Local IP
Issue 03 (2019-01-31)
Description
Select this to have the LTE Device use the GRE tunnel.
Clear it to configure the GRE tunnel but not use it.
Enter a descriptive name for the GRE tunnel.
Select which OSI layer (Layer2 GRE or Layer3 GRE) protocol the
GRE tunnels over a network. Use layer 2 when both of the LAN PC
IPs are in the same subnet domain. Use layer 3 when the LAN PC IPs
are in different subnet domains.
Enter the IP address or domain name of the remote gateway to which
the LTE Device's WAN interface tunnels traffic.
Enter a local host's IP address the LTE Device tunnels the traffic sent
to the remote gateway.
Copyright © Huawei Technologies Co., Ltd.
14 GRE VPN
104