A Layer 2 L2Tp Vpn Configuration Example - Huawei B2368 User Manual

LTE CPE B2368
User Guide
static route (Network > Static Route, then click Add New Static Route or click the Edit
icon next to an existing rule) in the Web Configurator to decide which Internet traffic goes
through the L2TP tunnel. By default the CPE does not send traffic through the L2TP tunnel.
For this example's network structure, set the static route to send all of the traffic destined for
192.168.2.0/24 through the tunnel (Gateway IP: 192.168.3.2).
Figure 13-6 Layer 3 L2TP VPN Configuration Example, Add Static Route

13.5 A Layer 2 L2TP VPN Configuration Example

This is the network structure used in this example:
Figure 13-7 Layer 2 L2TP VPN Network Structure Example
CPE A has a WAN IP (10.10.50.205) and connects to a LAN PC with IP (192.168.1.58). In
addition, L2TP BCP Server has a WAN IP (172.16.9.3) and connects to a LAN PC with IP
(192.168.1.214). Both of the LAN PC IPs must in the same subnet domain. You can set the
Layer 2 L2TP VPN in the L2TP VPN screen.
Issue 03 (2019-01-31) Copyright © Huawei Technologies Co., Ltd.
13 L2TP VPN
100