The Add/Edit L2Tp Tunnel Screen - Huawei B2368 User Manual

LTE CPE B2368
User Guide
Label
Enabled
Tunnel Name
L2TP Layer
Server IP
User Name
Modify

13.2.1 The Add/Edit L2TP Tunnel Screen

Use this screen to create or modify an L2TP VPN tunnel. Click the Add New Tunnel button
or an Edit icon next to a VPN tunnel in the Security > L2TP VPN screen to open the
following screen.
Issue 03 (2019-01-31)
Description
This shows whether the L2TP tunnel is turned on or off.
This shows the name of this tunnel.
This shows the OSI layer protocol (Layer3) the L2TP tunnels over a
network.
This shows the IP address of the remote gateway with which the LTE
Device establishes the L2TP tunnel.
The remote user must log into the LTE Device to use the L2TP VPN
tunnel.
This shows a user or user group that can use the L2TP VPN tunnel.
Click the Edit icon to go to the screen where you can edit the L2TP
VPN tunnel.
Click the Delete icon to delete an existing tunnel.
Copyright © Huawei Technologies Co., Ltd.
13 L2TP VPN
96