Huawei B2368 User Manual page 54

LTE CPE B2368
User Guide
Figure 5-8 Wireless 5G > More AP: Edit
The following table describes the fields in this screen.
Table 5-5 Wireless > More AP: Edit
Label
Wireless Network Setup
Wireless
Wireless Network Settings
Wireless
Network
NameSSID
Hide SSID
Wireless
Isolation
BSSID
Security Level
Issue 03 (2019-01-31)
Description
Select the Enable Wireless LAN check box to activate the wireless LAN.
The SSID (Service Set IDentity) identifies the service set with which a
wireless device is associated. Wireless devices associating to the access
point (AP) must have the same SSID.
Enter a descriptive name (up to 32 English keyboard characters) for the
wireless LAN.
Select this check box to hide the SSID in the outgoing beacon frame so a
station cannot obtain the SSID through scanning using a site survey tool.
Select this to keep the wireless clients in this SSID from communicating
with each other directly through the Router.
This shows the MAC address of the wireless interface on the LTE Device
when wireless LAN is enabled.
Copyright © Huawei Technologies Co., Ltd.
5 Wireless
46