The Wps Screen - Huawei B2368 User Manual

LTE CPE B2368
User Guide
Label
Security
Mode
Apply
Back

5.4 The WPS Screen

Use this screen to configure WiFi Protected Setup (WPS) on your LTE Device.
WPS allows you to quickly set up a wireless network with strong security, without having to
configure security settings manually. Set up each WPS connection between two devices. Both
devices must support WPS. See
about WPS.
Click Network Setting > Wireless (or Wireless 5G) > WPS. The following screen displays.
Select Enable and click Apply to activate the WPS function. Then you can configure the
WPS settings in this screen.
Issue 03 (2019-01-31)
Description
Select More Secure (WPA(2)-PSK to add security on this wireless
network. The wireless clients which want to associate to this network must
have same wireless security settings as the LTE Device. After you select to
use a security, additional options appears in this screen.
Or you can select No Security to allow any client to associate this network
without any data encryption or authentication.
See 5.2.1 More Secure (WPA(2)-PSK)
Click Apply to save your changes.
Click Back to exit this screen without saving.
NOTE
The LTE Device applies the security settings of the SSID1 profile (see
want to use the WPS feature, make sure you have set the security mode of SSID1 to WPA2-PSK or No
Security. Also, do not hide SSID1.
Copyright © Huawei Technologies Co., Ltd.
5.5.5 WiFi Protected Setup (WPS)
for more details about this field.
for more information
5.1.2 Before You Begin
5 Wireless
). If you
47