Huawei B2368 User Manual page 140

LTE CPE B2368
User Guide
European Call Transfer
Do the following to transfer a call (that you have answered) to another phone number.
Step 1 Press the flash key to put the caller on hold.
Step 2 When you hear the dial tone, dial "*98#" followed by the number to which you want to
transfer the call.
Step 3 After you hear the ring signal or the second party answers it, hang up the phone.
----End
European Three-Way Conference
Use the following steps to make three-way conference calls.
Step 1 When you are on the phone talking to someone, press the flash key to put the call on hold and
get a dial tone.
Step 2 Dial a phone number directly to make another call.
Step 3 When the second call is answered, press the flash key and press "3" to create a three-way
conversation.
Step 4 Hang up the phone to drop the connection.
Step 5 If you want to separate the activated three-way conference into two individual connections
(one is on-line, the other is on hold), press the flash key and press "2".
----End
USA Type Supplementary Phone Services
This section describes how to use supplementary phone services with the USA Type Call
Service Mode. Commands for supplementary services are listed in the table below.
After pressing the flash key, if you do not issue the sub-Command before the default sub-
Command time-out (2 seconds) expires or issue an invalid sub-Command, the current
operation will be aborted.
Table 15-7 USA Flash Key Commands
Command
Flash
Flash
USA Call Hold
Call hold allows you to put a call (A) on hold by pressing the flash key.
Issue 03 (2019-01-31)
SUB- Command
-
*98#
Copyright © Huawei Technologies Co., Ltd.
Description
Put a current call on hold to place a second call.
After the second call is successful, press the flash
key again to have a three-way conference call.
Put a current call on hold to answer an incoming
call.
Transfer the call to another phone.
15 VoIP
132