The Tr069 Screen - Huawei B2368 User Manual

LTE CPE B2368
User Guide
Figure 20-1 Maintenance > Remote MGMT
The following table describes the fields in this screen.
Table 20-1 Maintenance > Remote MGMT
Label
Services
LAN/WLAN
WAN
Port
Apply
Cancel

20.3 The TR069 Screen

TR-069 defines how Customer Premise Equipment (CPE), for example your LTE Device, can
be managed over the WAN by an Auto Configuration Server (ACS). TR-069 is based on
sending Remote Procedure Calls (RPCs) between an ACS and a client device. RPCs are sent
in Extensible Markup Language (XML) format over HTTP or HTTPS.
An administrator can use an ACS to remotely set up the LTE Device, modify settings,
perform firmware upgrades as well as monitor and diagnose the LTE Device. You have enable
the device to be managed by the ACS and specify the ACS IP address or domain name and
username and password.
Please refer to the TR-069 model tree for TR-069 settings and notice items.
Click Maintenance > Remote MGMT > TR069 to open the following screen. Use this
screen to configure your LTE Device to be managed by an ACS.
Issue 03 (2019-01-31)
Description
This is the service you may use to access the LTE Device.
Select the Enable check box for the corresponding services that you
want to allow access to the LTE Device from the LAN and WLAN.
Select the Enable check box for the corresponding services that you
want to allow access to the LTE Device from the WAN.
You may change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
Copyright © Huawei Technologies Co., Ltd.
20 Remote MGMT
148