Mitsubishi Electric MELFA CR750 Series Instruction Manual page 7

■ Revision history
Date of print
2015-02-06 BFP-A3372
2015-02-13 BFP-A3372-A
2015-04-09 BFP-A3372-B
2015-06-04
BFP-A3372-C
Manual No.
 First print
 The safety performance items in "Table 1-2 List of specifications"
was added.
 The risk matters (7)(8) in "Chapter 1.5.1 residual risk (Common)"
was added.
 The name of "Wiring unit" was changed to "Extended safety unit".
 The chapter 8 was added.
 The Table in the section 4.3.3 was removed.
 "1.2.1 Combination of software version" is added.
 Figures "Enable/disable setting", "Speed monitoring setting" are
modified in "Fig. 4.1 Parameter editing screen for the parameters"
 Specifications in the Version Combination B is added to "SLS
function" in "Table 4-2 Correspondence of the monitoring mode to
the contents of monitoring"
 Specifications in the Version Combination B is added to the "4.3.4
SLS function (Speed monitoring function)"
 The parameters SFPFCSIG, SLSMONSP, SLSLMTOV, SLSCOMP
are added to "5.1.1 Parameter List"
 The figure of "(1) Enable/disable setting screen" in "5.1.2 Parameter
details" is changed.
 The parameter SFPFCSIG is added to "Table 5.2 Safety monitoring
function parameters in the Enable/disable setting screen"
 The screen image for Version Combination B is added to
"(4) Speed monitoring setting screen" in "5.1.2 Parameter details".
 The parameters SLSMONSP, SLSLMTOV, SLSCOMP are added to
"Table 5-5 Safety monitoring function parameters in the speed
monitoring setting screen"
 "5.1.3 CRC output for the parameter file." is added.
 Descriptions are added to the countermeasure column for H2370
error in "6.1 List of errors related to the safety monitoring function"
Details of revisions