Configuring Usb Audio Codec - microHAM DigiKeyer Manual

Windows will automatically install the USB Audio Device driver to support the USB Audio CODEC in DIGI
KEYER.
Select "Recording." Reset Default Device and
Default Communications Device to an input on the
internal (primary) sound card in your computer.
Double click on "Microphone" USB Audio Codec
device, click on Advanced tab and verify that the
Default Format is set to 2 channel.
microHAM © 2016 All rights reserved

Configuring USB Audio CODEC

Windows automatically selects any newly installed
audio device as the default device for Sound
Playback and Sound Recording. This is
undesirable as Windows Sounds would be played
through DIGI KEYER and onto the air!
Open "Sound" in the Control Panel or right click on
the Speaker Icon on the Taskbar and select
"Playback." Reset the Default Device to Speakers
of your computer's primary sound device.
8