No Serial or Parallel port necessary, just one USB port
Complete "Computer <-> Radio" isolation
bidirectional transformer isolation of audio signals
•
optical isolation of ALL digital signals: Radio Control, CW, PTT, FSK
•
Internal USB sound capability
Wide range audio level: works with transceiver levels from 100 mV to 1.5 V
•
Extremely low noise floor: as low as 0.7 mV effective
•
High dynamic range: 84 dB typical, 82 dB minimum
•
Compatible with all MS Windows based logging or control software
the special microHAM "USB Device Router" program creates virtual COM ports for full operation with
•
standard Windows applications.
customizable presets allow instantly changing DIGI KEYER parameters to match the program
•
currently in use
Integrated computer control port for all radios CI-V, FIF-232, IF-232, RS-232
fully supports Icom, Kenwood, TenTec, Yaesu and other radios
•
no separate level converter required
•
Squelch input for additional software control
Strong RFI immunity
integrated chokes and filters for best RFI immunity
•
advanced shielding and circuit design for RFI product suppression
•
Connections:
Computer – USB
•
Radio - DB15
•
Front panel LEDs for easy visual feedback of CW, PTT, SQL, POWER and radio control data
Front panel adjustable Transmit and Receive audio levels
USB sound support built-in to the Operating System
does not require special drivers or limit your choice of applications.
•
Supported under Windows, Apple OS 10 and LINUX
•
Metal/Aluminum case, powder coated and silk screened
Free, no time limit, on-line firmware/software upgrades
You must set the CAT level jumpers inside the DIGI KEYER
If you power DigiKeyer from an external power supply ALWAYS
check the polarity of the external 13.8 V supply.
If your radio includes upgradeable firmware,
DO NOT perform any upgrade through DigiKeyer.
microHAM © 2016 All rights reserved
1 - FEATURES AND FUNCTIONS
2 - IMPORTANT WARNINGS
before using it for the first time.
3