Menu: Preset - microHAM DigiKeyer Manual

Hide thumbs Also See for DigiKeyer:

Table of Contents

Minimize: Clicking this will minimize Router to the

system tray at the bottom right corner of the

Windows Taskbar (the "System Notification

Area").

TIP: When Router is minimized you can restore it by double-clicking on the Router tray icon.

also restore Router by double-clicking on the Router icon on the desktop or restarting Router from the

Programs menu.

Exit: Clicking on this item will terminate Router.

NOTE: when Router is terminated, application software will be unable to communicate with

DigiKeyer and the radio.

The requirements of each program are different and each one may handle radio control, CW and PTT in its

own way. In some cases what works for one application may not work properly with another. To get

maximum performance from CW Keyer, you may wish to customize the settings for each application.

For easy switching among applications, Router supports up to 12

user definable Presets. Different configurations can be stored in

these presets and recalled almost instantly simply by clicking on the

preset button.

Each preset contains the settings for all devices connected to, and

controlled by, Router. For example, if Router controls a

microKEYER, a DigiKEYER and a USB Interface, each preset

remembers the settings for all devices including the assignment of

COM ports and the contents of all sub-tabs except the FSK/CW

Messages and DVK tabs.

NOTE: Presets for various loggers are not available until they

have been saved by the user using Preset | Save as. For

setup instructions for various loggers refer to Setup Guide

documents available in Router Help menu (Use Help |

Download Documents first if Help | Setup Guides are not

available or incomplete).

There are three ways to apply a preset once it is created:

1. Click on Preset and select the desired preset from the pull-

down menu.

2. Click on a preset button. To have buttons visible in Router, Preset | Show Buttons must be

checked. When the settings from a preset are applied, a green light located in the preset button is

lit. This green light is on ONLY when all settings in Router are same as those stored in the preset.

PRESET MENU

You can

Table of Contents