Table of Contents
Advertisement
1.
Insert the microHAM CD in your CDROM/DVD drive
and navigate to Drivers/OS-X or use your web
browser to go to
http://www.ftdichip.com/Drivers/VCP.htm and
down load the latest driver image for OS-X.
2.
Open FTDIUSBSerialDriver_v2_2_18.dmg by
clicking on it.
3.
For OS-X 10.4, 10.5 or 10.6 open
FTDIUSBSerialDriver_10_4_10_5_10_6 and follow
the instructions to install.
4.
Plug in the USB cable
5.
Turn on the radio or external power supply.
6.
Follow the instructions for your software to configure the application to work with DigiKEYER.
3. The Windows setup utility will start and ask into
which folder Router and its supporting files should
be installed. Note: unless you have a very strong
reason to install Router elsewhere, please accept
the default location.
4. When the Router installation is completed, plug in
the USB cable when instructed, click "Finish" to
launch Router for the first time and proceed to
configuring Router for your station and software.
microHAM © 2016 All rights reserved
Mac OS X INSTALLATION
MICROSOFT WINDOWS INSTALLATION
Installing microHAM USB Device Router
To install Router click on the Install USB
1.
Device Router link on the installation CD or
download the most recent installation
package from the web site:
www.microHAM.com/downloads.html.
2. If you download an updated package, right click on
"urouter_release_xx_xx.exe" (xx_xx is version) and
choose "Run as administrator" to start installation.
7
Advertisement
Table of Contents
