Table of Contents
Advertisement
Manuals: Link to microHAM manuals located on your system.
Setup Guides: Link to software configuration guides for many common applications.
Cable Schematics: Link to cable diagrams.
Download Documents: Downloads microHAM documentation including updated manuals and setup
guides. You may specify the products for which you want documentation.
NOTE: Requires an Internet connection.
microHAM Home Page: Link to
microHAM Downloads Page: Link to
Show Tooltips: When checked, small, single line help is displayed below the mouse cursor.
Update Router: Download and install the most recent version of Router.
About: Shows the Router's internal version number
Change logs: Shows the Router and firmware changes.
There are three (3) tabs for configuring DIGI KEYER. Each tab controls a part of DIGI KEYER's functions.
Any change to the first two (2) tabs are applied immediately to DIGI KEYER. Changes in Messages are
NOT applied automatically. To store them use buttons Store or Store All.
Ports - used to assign virtual ports to the DIGI KEYER for
use by applications.
Keying - used to configure timing of the PTT signal,
operation of the FSK keyboard and the audio
processor.
Messages – used to store FSK messages.
microHAM © 2016 All rights reserved
HELP MENU
www.microHAM.com
www.microham.com/contents/en-us/d29.html
DEVICE CONFIGURATION TABS
15
Advertisement
Table of Contents
