Menu: Device - microHAM DigiKeyer Manual

3. By right clicking on the system tray icon when the Router is minimized.
The presets and the current router configuration are stored to the registry when
Router is closed and recalled when Router is loaded.
Save as - Saves the current Router settings to a preset for future use.
Rename - Allows renaming of an existing preset.
Delete - Delete chosen preset.
Show buttons - When checked, Router shows the preset buttons.
Router can control several devices. This allows configuring the settings for all connected devices at one
time by using the Presets.
Each device has its own tab (page) in the main Router
notebook. The content of a device tab depends on device
type. Adding a device is automatic the first time Router
detects a supported device (USB driver). Once detected, a
device remains in Router even though device is
disconnected. Each device is identified by product
identification number and a unique serial string.
Rename – Creates a custom device name. This is useful
if two or more devices are connected to the Router. For
example CW KEYER, micro Keyer and USB Interface II
can be renamed to more identifiable names as shown
here..
Save Template - will save the current Router settings to template file.
When clicked, Router will open a standard File Save dialog window – the default location is
C:\Documents and Settings\All Users\Application Data\microHAM\cfg. If a hypertext (html) or plain
text (txt) documentation file of the same name as the template is present in the same directory, it will
be associated with the template.
Load Template – will automatically configure Router from a template (*.tpl file).
When clicked, Router will open a standard File dialog – the default location is: C:\Documents and
Settings\All Users\Application Data\microHAM\cfg - and the desired template can be chosen. When
Router loads a template, it looks for an html or txt file with the same name as the template in the
same directory. If such file is found, it is displayed.
microHAM © 2016 All rights reserved
DEVICE MENU
Delete - Removes a device from the Router. Only
disconnected devices with a RED "X" on device tab can be
removed. To disconnect a device from Router, unplug the
USB cable from the computer or device.
13