Menu: Preset - microHAM CW KEYER Manual

Minimize: Clicking this will minimize Router to the
system tray at the bottom right corner of the
Windows Taskbar (the "System Notification
Area"). .
TIP: When Router is minimized you can restore it by double-clicking on the Router tray icon.
also restore Router by double-clicking on the Router icon on the desktop or restarting Router from the
Programs menu.
Exit: Clicking on this item will terminate Router.
NOTE: when Router is terminated, application software will be unable to communicate with CW Keyer
and the radio.
The requirements of each program are different and each one may handle radio control, CW and PTT in its own
way. In some cases what works for one application may not work properly with another. To get maximum
performance from CW Keyer, you may wish to customize the settings for each application.
For easy switching among applications, Router supports up to 12 user
definable Presets. Different configurations can be stored in these
presets and recalled almost instantly simply by clicking on the preset
button.
Each preset contains the settings for all devices connected to, and
controlled by, Router. For example, if Router controls a microKEYER,
a CW Keyer and a USB Interface, each preset remembers the settings
for all devices including the assignment of COM ports and the contents
of all sub-tabs except the FSK/CW Messages and DVK tabs.
NOTE: Presets for various loggers are not available until they have
been saved by the user using Preset | Save as. For setup instructions
for various loggers refer to Setup Guide documents available in Router
Help menu (Use Help | Download Documents first if Help | Setup
Guides are not available or incomplete).
There are three ways to apply a preset once it is created:
1. Click on Preset and select the desired preset from the pull-down
menu.
2. Click on a preset button. To have buttons visible in Router, Preset |
Show Buttons must be checked. When the settings from a preset
are applied, a green light located in the preset button is lit. This
green light is on ONLY when all settings in Router are same as
those stored in the preset.
microHAM © 2016 All rights reserved
PRESET MENU
11
You can