Menu: Preset - microHAM microKEYER II User Manual

Microham microkeyer ii radio interface user's manual

Hide thumbs Also See for microKEYER II:

Table of Contents

Minimize: Clicking this will minimize Router to the system

tray at the bottom right corner of the Windows Task

Bar (the "System Notification Area").

TIP: When Router is minimized you can restore it by double-clicking on the Router tray icon.

can also restore Router by double-clicking on the Router icon on the desktop or in the Programs

menu.

Exit: Clicking on this item will terminate Router.

NOTE: when Router is terminated the virtual ports will be closed and application software will be unable to

communicate with microKEYER II and the radio.

The requirements of each application (logging, control and digital mode

programs) are different. Each program handles radio control, CW,

FSK, PTT, and the sound card its own way. In some cases, what works

for one application may not work properly with another. To get

maximum performance from microKEYER II, the user should create

customized settings for each application used.

For easy switching among applications, Router supports up to 12 user

definable Presets. Different configurations can be stored in these

presets and recalled almost instantly simply by clicking on the preset

button.

Each preset contains the settings for all devices connected to, and

controlled by, Router. For example, if Router controls a microKEYER,

a CW Keyer and a USB Interface, each preset remembers the settings

for all devices including the assignment of COM ports and the contents

of all sub-tabs except the FSK/CW Messages and DVK tabs.

NOTE: Presets for various loggers are not available until they have

been saved by the user using Preset | Save as. For setup instructions

for various loggers refer to Setup Guide documents available in Router

Help menu (Use Help | Download Documents first if Help | Setup

Guides are not available or incomplete).

There are three ways to apply a preset once it is created:

1. Click on Preset and select tfrom the pull-down menu.

2. Click on a preset button. To have buttons visible in Router, Preset | Show Buttons must be checked.

When the settings from a preset are applied, a green light located in the preset button is lit. This

green light is on ONLY when all settings in Router are same as those stored in the preset.

PRESET MENU

You

Table of Contents