NEC ASPILA EX Feature Manual page 71

Programming
Related Features
Aspila EX Software Manual
• 14-01-11 : Basic Trunk Data Setup - Account Code
Enable (1) or disable (0) Forced Account Codes for each trunk.
• 15-07-01 : Programming Function Keys
Assign a function key as an Account Code key (code 50). Use this key instead of the dial pad
to enter the * before and after the Account Code.
• 20-06-01 : Class of Service for Extensions
Assign a Class of Service (1-15) to an extension.
• 21-04-01 : Toll Restriction Class
Use this option to assign a Toll Restriction Class (1-15) to an extension.
• 35-05-01 : Account Code Setup - Account Code Mode
For each Class of Service (1-15) use this option to select the Account Code Mode. The
options are:
0 Account Codes disabled. (Any codes you enter dial out as part of your initial
call.)
1 Account Codes optional (not required).
2 Account Codes required (forced) but not verifiable.
3 Account Codes required (forced) and verifiable.
• 35-05-02 : Account Code Setup - Forced Account Code Toll Call Setup
For each Class of Service (1-15), enter 1 in this option to enable Forced Account Codes for
just toll calls. Enter 0 to enable Forced Account Codes for local and toll calls.
• 35-05-03 : Account Code Setup - Account Codes for Incoming Calls
For each Class of Service (1-15), enter 1 in this option to enable Account Codes for incoming
calls. Enter 0 to disable Account Codes for incoming calls. If disabled, any codes you enter
dial out on the connected trunk.
• 35-05-04 : Account Code Setup - Hiding Account Codes
For each Class of Service (1-15), enter 1 to have the system hide Account Codes on an exten-
sion's display as they are entered. Enter 0 to have the Account Codes displayed.
• 35-06-01 : Verified Account Code Table
Use this option to enter data into the Verified Account Code Table. You can enter up to 2000
codes from 3-16 digits in length. For a wild card, press the FLASH key.
Abbreviated Dialing
Abbreviated Dialing bins can contain stored Account Codes. Prevent them from being dis-
played using 20-07-04.
Automatic Route Selection
ARS can force a user to enter an Authorization Code prior to using a certain route. The system
verifies the ARS Authorization Code dialed against the ARS Authorization Code list (Pro-
gram 44-03).
One-Touch Calling
To simplify Account Code entry, store the Account Code (e.g., *1234*) in a One-Touch Key.
Just press the key instead of dialing the codes.
PBX Compatibility
When using Account Codes, do not use an asterisk within a PBX access code. Otherwise,
after the *, the trunk would stop sending digits to the central office.
Station Message Detail Recording
Account Codes appear on the SMDR report (even if they are hidden on the phone's display).
Account Codes
Features 57