Dss Console Key Assignment - NEC ASPILA EX Feature Manual

Program 30 : DSS/DLS Console Setup

30-03 : DSS Console Key Assignment

30-03 : DSS Console Key Assignment
Level:
SA
Description
Input Data
DSS Console Number
Key Number
01-60 (Model A)
001-200 (Model C)
Function
Function
Number
01 DSS / One-touch
02 Microphone Key (ON/
OFF)
03 DND Key
04 BGM (ON/OFF)
05 Headset
06 Transfer Key
774 Programming
• Available.
Use Program 30-03 : DSS Console Key Assignments to customize the key assignments for
110-Button DSS Consoles. A DSS Console key can have any function up to four digits long (e.g.,
extension number or Service Code).
To prevent lamping problems when reassigning DSS Console keys, it is recommended that you
clear an extension's programmed key before reassigning it (Enter key to be cleared + FLASH key
[If using Web or PC Programming, delete the key assignments and upload the change to the system
before proceeding]). Without clearing an extension's key first, your DSS Console may not show the
correct lamping, although the DSS function will work correctly.
If you are programming the system from the extension to which the DSS Console is connected,
either by phone or using the Web or PC Program, you may need to unplug the DSS and plug it back
in to reset the console's lamping.
Index 1
Index 2
Function number
0-99 (General functional level)
* 00-* 99 (Appearance functional level)
Function Number List
[1] General functional level (00 – 99)
Additional Data
Extension number or any
numbers (Up to 24 digits)
Aspila EX
01-32
Additional data
Refer to functional number list
LED Indication
Red On: extension busy
Off: extension idle
Rapid Blink Red: DND or Call Forward
Red On: Mic On
Off: Mic Off
Red On: DND
Red On: BGM ON
Off: BGM OFF
Red On: Under headset operation
None
Aspila EX Software Manual