NEC ASPILA EX Feature Manual page 129

Related Features
Aspila EX Software Manual
• 20-08-15 : Class of Service (Outgoing Call Service) - Block Outgoing Caller ID
Allow (1) or prevent (0) a user's Class of Service from automatically blocking outgoing
Caller ID information when a call is placed. If allowed (i.e., block enabled), the system auto-
matically inserts the Caller ID block code (defined in Program 14-01-21) before the user
dialed digits (this requires Program 14-02-10 to be enabled). If prevented (i.e., block dis-
abled), the system outdials the call just as it was dialed by the user.
• 20-09-01 : Class of Service Options (Incoming Call Service) - Second Call for DID/DISA/
DIL/E&M
In an extension's Class of Service, enable (1) or disable (0) forced second call. When enabled
the user can not turn off second call indication by Service Code 779+0. When disabled the
user can choose to receive/not receive second calls with Service Code 779+1.
• 20-09-02 : Class of Service Options (Incoming Call Service) - Caller ID Display
In an extension's Class of Service, enable (1) or disable (0) the extension's ability to display
incoming Caller ID name/number information.
• 20-13-06 : Class of Service Options (Supplementary Service) Automatic Off-Hook Sig-
nal
In order for a display phone to show Caller ID information for a second incoming call, must
be enabled (1).
• 20-19-01 : System Options for Caller ID - Caller ID Display Formatting
Determine whether the first 10 digits (0) or last 10 digits (1) should be displayed when Caller
ID exceeds 12 digits.
• 20-19-02 : System Options for Caller ID - Caller ID Wait Timer
Determine how long an incoming CO call should wait for Caller ID information from telco
before the system connects the call.
• 20-19-03 : System Options for Caller ID - Edit Caller ID
In an extension's Class of Service, enable (1) or disable (0) the extension's ability to edit the
stored Caller ID information.
• 80-02-01 : DTMF Tone Setup - Duration
80-02-02 : DTMF Tone Setup - Pause
With Program 14-01-20 set to 1 and Program 14-02-10 set to 1, if the Caller ID block code is
being sent too quickly for the telco to recognize, lengthen the pause and duration time for the
DTMFs.
Automatic Route Selection
ARS can block outgoing Caller ID information on a call-by-call basis. To do this, insert the
Caller ID block code in the ARS Dial Treatments.
Station Message Detail Recording
Caller ID information outputs on the SMDR report.
Voice Mail
The system can send Caller ID digits to the voice mail if allowed in Program 14-02-10.
Caller ID
Features 115