Pulse to Tone Conversion
•
Available
Description
Conditions
Default Setting
Programming
Related Features
Operation
300
Features
An extension can use Pulse to Tone Conversion on trunk calls. Pulse to Tone Conversion lets a user
change their extension's dialing mode while placing a call. For systems in a Dial Pulse area, this
permits users to access dial-up services from their Dial Pulse line. The user can, for example:
•
Place a call to a tele-banking system over a DP trunk.
•
Depending on programming:
Manually implement Pulse to Tone Conversion
OR
Wait 10 seconds.
•
Dial the tele-banking security code and desired number. The system dials the digits after the
conversion as DTMF.
Pulse to Tone Conversion is only valid for Dial Pulse trunks (Program14-02-01, options 0 or 1).
Enabled.
•14-02-07 : Analogue Trunk Data Setup - DP to DTMF Conversion Options
For each trunk, set the type of DP to DTMF Conversion required: automatic (0), automatic
and manual (1), or manual (2).
Central Office Calls, Placing
Other programmed options for outgoing calls can affect how a call is placed. Check or pro-
gram these options as needed.
To convert your phone's dialing to tone after placing your call on a pulse line:
1.
Place call over pulse line.
2.
Dial # to switch the DP trunk to DTMF dialing.
Pulse to Tone Conversion
Aspila EX
Aspila EX Software Manual