NEC ASPILA EX Feature Manual page 557

Default
Conditions
Feature Cross Reference
Telephone Programming Instructions
Aspila EX Software Manual
Route 1, Order Number 1 = 1 (Trunk Group 1), Order Numbers 2, 3, 4 = 0 (not specified)
All Other Routes (2-100) and Order Numbers (1-4) = 0 (not specified)
None
None
To enter data for Program 14-06 (Trunk Group Routing):
1. Enter the programming mode.
2. 14 06
14-06-01 Route TBL1
Order1 Data1
­ ¯
back
3. Enter the number of the item you want to program.
14-06-nn Route TBLnnn
nnnnn
¬
4. Select the Trunk Group Routing Table number to be programmed by pressing the FLASH or
the VOLUME p or VOLUME q keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you've exited that series's programming section.
Program 14 : Trunk Basic Setup
14-06 : Trunk Group Routing
select
®
Programming 551