HUAWEI TP3106&TP3118S&TP3118 Telepresence
Installation Guide
9.3 Installing the Tabletop Displays
The second row of the multi-functional conference table has six tabletop displays. The
installation method is the same as that for the front row of the multi-functional conference table.
For details, see
9.4 Installing the Tabletop
Context
The second-row tabletop has six segments. During installation:
l
l
Procedure
Step 1 Install tabletop segment 3. For details, see
Step 2 Place tabletop segment 4 to the conference table stand, and align the holes.
Step 3 Mount the front panels to the joints between tabletop segments 3 and 4. For details, see
8-19.
Step 4 Secure tabletop segments 3 and 4 with eight ST6_3 x 40 self-tapping screws.
Step 5 Install tabletop segments 2 and 5 using methods described in
Step 6 Install tabletop segments 1 and 6 using methods described in
----End
Follow-up Procedure
Tighten the screws on the tabletop displays after the tabletop is installed. For details, see
Installing the Tabletop
9.5 Install the Cable Troughs
The second row of the multi-functional conference table has six cable troughs. The installation
method is the same as that for the front row of the multi-functional conference table. For details,
see
When laying out an XLR microphone cables that comprise multiple cable segments, place the
cable joints out of the cable trough of the multi-functional conference table. Otherwise, you may
fail to install the trough cover (a conference table decorative part).
Issue 07 (2013-11-08)
8.4 Installing the Tabletop
Install tabletop segments in the following order: 3 and 4; 2 and 5; 1 and 6.
Match the numbers on the tabletop segments' rear sides with those of the tabletop display
backboards.
Displays.
8.6 Installing the Cable
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Installing the Second Row of the Multi-Functional
Displays.
Figure
8-18.
Troughs.
Conference Table
Step 2
and
Step
4.
Step 2
and
Step
4.
Figure
8.4
79