Huawei Telepresence TP3106 Installation Manual page 77

HUAWEI TP3106&TP3118S&TP3118 Telepresence
Installation Guide
Table 9-2 TP3118S's second-row multi-functional table parts
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
Issue 07 (2013-11-08)
Component Qua
Name ntit
y
Fixture 1
Table leg 5
Steel plate 5
Steel frame 4
Front 4
connecting
rod
Rear 4
connecting
rod
Tabletop 4
display
Tabletop 4
display
backboard
U-shaped 4
board
Side board 4
Tabletop 4
segments
Front panel 6
Cable trough 4
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Installing the Second Row of the Multi-Functional
Carto Description
n No.
- -
- Table legs 1 to 5 from left to right.
l The three center table legs (table legs 2 to 4) are
identical, same as the five center table legs of the
TP3118, as shown in
l The leftmost and rightmost table legs (table legs
1 and 5) are symmetric with each other, same as
those of the TP3118, as shown in
- Steel plates 1 to 7 from left to right.
l The three center steel plates (steel plates 2 to 4)
are identical.
l The leftmost and rightmost steel plates (steel
plates 1 and 5) are symmetric with each other.
- All steel frames are identical, as shown in
9-1.
- All the front connecting rods are identical, as shown
in Figure 9-2.
- All the rear connecting rods are identical, as shown
in Figure 9-3.
- All the tabletop displays are identical.
- The tabletop display backboards are identical in
dimensions, but the grain of the wood on each will
vary to match that of the tabletop into which it will
fit.
- All U-shaped boards are identical.
- All side boards are identical.
- The tabletop segments 2 and 5 present in the TP3118
are removed from the TP318S.
- -
- All cable troughs are identical, as shown in
9-4.
Conference Table
Figure 9-5.
Figure 9-6.
Figure
Figure
72